HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

admitrcopyvv
DESCRIPTION
The admitrcopyvv command adds an existing virtual volume to an existing Remote Copy volume
group.
SYNTAX
admitrcopyvv <VV_name> <group_name> <target_name>:<sec_VV_name>
[<target_name>:<sec_VV_name> ...]
admitrcopyvv -pat <pattern> <group_name>
<target_name>:<sec_vv_pattern>...
AUTHORITY
• Super, Edit
• Any role granted the rcopyvv_admit right.
OPTIONS
-pat
Specifies that specified patterns are treated as glob-style patterns and that all Remote Copy volumes
matching the specified pattern will be admitted to the Remote Copy group.
SPECIFIERS
<VV_name>
Specifies the name of the existing virtual volume to be admitted to an existing Remote Copy volume
group that was created with the creatercopygroup command (see “creatercopygroup”
(page 126)).
<group_name>
Specifies the name of the existing Remote Copy volume group created with the creatercopygroup
command (see “creatercopygroup” (page 126)), to which the volume will be added.
<target_name>:<sec_VV_name>
The target name associated with this group, as set with the creatercopygroup command (see
“creatercopygroup” (page 126)). The target is created with the creatercopytarget command
(see “creatercopytarget” (page 128)). <sec_VV_name> specifies the name of the secondary volume
on the target system. One <target_name>:<sec_VV_name> must be specified for each target
of the group.
<sec_vv_pattern>
Specifies the pattern that is used to create volume on remote side.
<pattern>
Specifies a glob-style pattern. If this specifier is not used, the VV_name specifier must be used.
RESTRICTIONS
Functionality of this command requires the 3PAR Remote Copy license. Contact your local service
provider for more information.
EXAMPLES
In the following example, the admitrcopyvv command adds the volume vv1 to the primary
volume group Group1. At the same time, it adds the volume vv1.r on the target system
admitrcopyvv 51