HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

showsnmpmgr
DESCRIPTION
The showsnmpmgr command displays a list of registered SNMP managers for receiving traps.
NOTE: SNMP is not part of the Common Criteria evaluated configuration. See the HP 3PAR
InForm OS Common Criteria Administrator’s Reference for more information before using this
command in Common Criteria mode.
SYNTAX
showsnmpmgr
AUTHORITY
Any role in the system.
OPTIONS
None.
SPECIFIERS
None.
RESTRICTIONS
None.
EXAMPLES
The following example displays a list of registered managers:
cli% showsnmpmgr
Manager IP Port
82.185.98.76 162
82.162.9.7 8004
5def:2008:abcd::161a 9162
In the example above:
Manager IP. The trap manager’s IP address.
Port. The trap manager’s port number.
EXIT STATUS
The following codes are returned indicating success or failure:
0 indicates that the command was successful.
1 indicates that the command failed.
NOTES
Managers are registered using the addsnmpmgr command. See Section (page 43) for additional
information.
466 Show Commands