HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

showrctransport
DESCRIPTION
The showrctransport command shows status and information about end-to-end transport for
Remote Copy in the system.
NOTE: Remote Copy is not part of the Common Criteria evaluated configuration. See the HP
3PAR InForm OS Common Criteria Administrator’s Reference for more information before using
this command in Common Criteria mode.
SYNTAX
showcrtransport [options]
AUTHORITY
Any role in the system.
OPTIONS
–rcip
Show information about Ethernet end-to-end transport.
–rcfc
Show information about Fibre Channel end-to-end-transport.
SPECIFIERS
None.
RESTRICTIONS
None.
EXAMPLES
The following example displays status and information about the end-to-end transport for all Remote
Copy configured ports:
cli% showrctransport
N:S:P Peer_Address Address State Type
0:5:1 - 10.100.5.87 new rcip
1:5:1 - 10.101.6.87 new rcip
The columns in the previous example are identified as follows:
• N:S:P. The physical position of the port, in the syntax node:slot:port.
• Peer_Address. IP address of the Remote Copy storage server port connected to this Remote
Copy port.
• Address. IP address of the Remote Copy storage server port.
• State. Remote copy end-to-end transport state. Can include one of the following results:
new. Configuration is not completed on this port.◦
◦ incomplete. Configuration is not yet completed on the peer port.
showrctransport 457