HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

showrcopy
DESCRIPTION
The showrcopy command displays details of the Remote Copy configuration.
NOTE: Remote Copy is not part of the Common Criteria evaluated configuration. See the HP
3PAR InForm OS Common Criteria Administrator’s Reference for more information before using
this command in Common Criteria mode.
SYNTAX
The syntax for the showrcopy command can be one of the following:
• showrcopy [options <arg>] [links]
• showrcopy [options <arg>] [groups [<name_or_pattern>]]
• showrcopy [options <arg>] [targets [<name_or_pattern>]]
AUTHORITY
Any role in the system.
OPTIONS
-d
Displays more detailed configuration information.
-domain <domainname_or_pattern>[,<domainname_or_pattern>...]
Shows only Remote Copy groups whose virtual volumes are in domains with names matching one
or more of the specified domain name or pattern.
SPECIFIERS
links
Specifies all Remote Copy links.
groups [<name_or_pattern>]
Specifies either all Remote Copy volume groups or a specific Remote Copy volume group(s) by
name or glob-style patterns.
targets [<name_or_pattern>]
Specifies either all target definitions or a specific target(s) definition by name or glob-style.
RESTRICTIONS
This command requires the 3PAR Remote Copy license. Contact your local service provider for
more information.
EXAMPLES
The following example displays output from the showrcopy command:
cli% showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
InServ2 9 IP ready mirror_config
454 Show Commands