HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

showportdev
DESCRIPTION
The showportdev command displays detailed information about either all devices or only
arbitrated loop devices on a Fibre Channel port.
SYNTAX
showportdev loop|all|ns <N:S:P>
AUTHORITY
Any role in the system.
SUBCOMMANDS
loop|all|ns
loop
Specifies that information is returned for arbitrated loop devices that are attached to the specified
port. If this subcommand is not specified, then the all subcommand must be specified on the
command line.
all
Specifies that information for all devices attached to the specified port is returned. If this subcommand
is not specified, then the loop subcommand must be specified on the command line.
ns
Specifies that information for the switch name server database is returned. This subcommand is
only for use with fabric-attached topologies.
fcf
Specifies that information for all FCoE forwarders (FCFs) known to the specified port are returned.
This subcommand is only for use with Fibre Channel over Ethernet (FCoE) ports.
OPTIONS
None.
SPECIFIERS
<node:slot:port>
Specifies the port for which information about devices on that port are displayed.
node
Specifies the node.
slot
Specifies the PCI bus slot in the specified node.
port
Specifies the Fibre Channel port number of the PCI card in the specified PCI bus slot.
RESTRICTIONS
The loop subcommand is functional only in a private loop topology.
showportdev 447