HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

MFR. Physical disk manufacturer.
Model. Physical disk manufacturer’s device ID.
Serial. Physical disk manufacturer’s serial number.
FW_Rev. Physical disk manufacturer’s firmware revision tracking string.
The following example displays chunklet use information for all disks:
cli% showpd c
-------- Normal Chunklets --------- - Spare Chunklets --
- Used -- -------- Unused --------- - Used - - Unused
--
ID CagePos Type State Total OK Fail Free Uninit Unavail Fail OK Fail Free Uninit
Fail
0 0:0:0 NL normal 2793 76 0 2717 0 0 0 0 0 0
0 0
1 0:3:0 FC normal 272 234 0 4 0 0 0 0 0 34
0 0
2 0:4:0 NL normal 2793 76 0 2717 0 0 0 0 0 0
0 0
3 0:7:0 FC normal 272 228 0 10 0 0 0 0 0 34
0 0
--------------------------------------------------------------------------------------------
4 total 6130 614 5448 68
The columns in the previous example are identified as follows:
ID. Physical disk ID, as assigned by the system. For unadmitted disk the ID appears as dashes
(––).
CagePos.Position of PD, in the format <cage>:<side>.<mag>:<disk> where <cage>
is the cage number, <side> is 0 or 1 depending on whether the cage is on the left or right
(from the front view) of the disk chassis, <mag> is the magazine number (0 through 4) and
<disk> is the disk number (0 through 3) within the magazine. If the position ends with a
question mark (?) the current position of the drive is not known (for example, the drive may
be missing), and the position shown is the last known position.
Type. Device type of the PD.
FC - Fibre Channel
NL - Nearline
SSD - Solid State Drive
State. State of the PD can be one of the following:
normal - PD is normal
degraded - The PD is not operating normally. Use showpd -s to find out the detail
information.
new - The PD is new, needs to be admitted before it can be used (see help admitpd).
failed - The PD has failed.
Total. Total size of the disk in MB (1024^2 bytes).
Normal Chunklets. This area provides information about chunklets that are not reserved
for use as spares.
424 Show Commands