HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

1 0 OK OK OK OK OK 100
1 1 NotPresent -- -- -- NotPresent 0
In the example above:
• Node. The node ID.
• PS. The power supply ID.
• PSState. The power supply state. Values are as follows:
--. Cannot determine the state.◦
◦ OK. The power supply is operating normally.
◦ Failed. The power supply is operating abnormally.
◦ NotPresent. The power supply is missing.
◦ Degraded. There is a fan failure, or the battery state is not OK.
• FanState. The power supply fan state. Values are as follows:
--. Cannot determine the state.◦
◦ OK. The fan is operating normally.
◦ Failed. The fan is operating abnormally.
• ACState. The state of the AC power. Values are as follows:
--. Cannot determine the state.◦
◦ OK. Normal operation.
◦ Failed. Abnormal operation.
• DCState. The state of DC power. Values are as follows:
--. Cannot determine the state.◦
◦ OK. Normal operation.
◦ Failed. Abnormal operation.
• BatState. The battery state. Values are as follows:
OK. Normal operation.◦
◦ --. Cannot determine the state.
◦ Failed. Abnormal operation.
◦ NotPresent. The battery is missing.
◦ MaxLifeLow. The maximum battery life is low.
• ChrgLvl. The battery charge level in percentage.
The following example displays the detailed state of the nodes:
cli% shownode -s
Node -State- -Detailed_State-
412 Show Commands