HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

These columns and values are described in detail in the following examples.
cli% shownode -mem
Node Riser Slot SlotID -Name-- -Usage- --Type--- --Manufacturer--- -Serial- -Latency-
Size(MB)
0 n/a 0 J4200 DIMM0 Control FB-DIMM Micron Technology E20BC997 CL5.0/5.0
2048
0 n/a 1 J4300 DIMM1 Control FB-DIMM Micron Technology E20BC996 CL5.0/5.0
2048
0 2-slot 0 J0901 DIMM0.0 Data DDR_SDRAM Micron Technology E010DF65 CL2.0/2.5
2048
0 4-slot 1 J0900 DIMM1.0 Data DDR_SDRAM Micron Technology E010DF98 CL2.0/2.5
2048
0 4-slot 2 J1300 DIMM2.0 Data DDR_SDRAM Micron Technology E010DF64 CL2.0/2.5
2048
1 n/a 0 J4200 DIMM0 Control FB-DIMM Micron Technology E20BC995 CL5.0/5.0
2048
1 n/a 1 J4300 DIMM1 Control FB-DIMM Micron Technology E20BC992 CL5.0/5.0
2048
1 2-slot 0 J0901 DIMM0.0 Data DDR_SDRAM Micron Technology E010DF6A CL2.0/2.5
2048
1 4-slot 1 J0900 DIMM1.0 Data DDR_SDRAM Micron Technology E010DF6F CL2.0/2.5
2048
1 4-slot 2 J1300 DIMM2.0 Data DDR_SDRAM Micron Technology E010DF69 CL2.0/2.5
2048
In the example above:
• Node. The node ID.
• Riser. The location of the DIMM. The DIMM may be located in a 2-slot or 4-slot riser
card. If the DIMM is located on the motherboard the value is n/a.
• Slot. The slot number.
• SlotID. The slot ID in JXXX format.
• Name. The location of the DIMM slots printed on the board.
• Usage. The usage of the physical memory, either Control or Data.
• Type. The type of DIMM such as SDRAM, DDR, or DDR2.
• Manufacturer. The manufacturer of the memory.
• Serial. The serial number.
• Latency. The CAS latency.
• Size. The memory size in MB.
cli% shownode -drive
...
Node Drive -Manufacturer- ---Model--- -Serial- -Firmware- Size(MB) Type
0 0 Seagate ST9100821AS 5NJ09DF3 3.AAB 95396 SATA
1 0 Seagate ST9100821AS 5NJ08NA4 3.AAB 95396 SATA
In the example above:
• Node. The node ID.
• Drive. The disk drive ID.
• Manufacturer. The manufacturer of the disk drive.
• Model. The model number of the disk drive.
410 Show Commands