HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

showbattery
DESCRIPTION
The showbattery command displays battery status information including serial number, expiration
date, battery life, and so on, which could be helpful when determining battery maintenance
schedules.
SYNTAX
showbattery [options] [<node_ID> ...]
showbattery -listcols
AUTHORITY
Any role in the system.
OPTIONS
–d
Specifies that detailed battery information, including battery test information, serial numbers, and
expiration dates, is displayed.
–log
Specifies the battery test log information.
-i
Specifies the battery inventory information.
-s
Specifies the detailed states of the battery.
SPECIFIERS
<node_ID>...
Displays the battery information for the specified node ID(s). Node_ID is an integer from 0 through
7. This specifier is not required.
RESTRICTIONS
None.
EXAMPLES
The following example displays battery status information:
cli% showbattery
Node PS Bat Serial --State--- ChrgLvl(%) -ExpDate-- Expired Testing
0 0 0 FFFFFFFF OK 100 05/15/2007 No No
0 1 0 FFFFFFFF OK 100 05/15/2007 No No
1 0 0 -- NotPresent -- -- No No
1 1 0 -- NotPresent -- -- No No
The columns in the previous example are identified as follows:
• Node. The controller node number.
• PS. The power supply number.
• Bat. The battery ID.
352 Show Commands