HP 3PAR InForm OS 3.1.1 Command Line Interface Reference
setrcopytarget
DESCRIPTION
The setrcopytarget command sets the name, policies, and throughput of a target definition.
NOTE: Remote Copy is not part of the Common Criteria evaluated configuration. See the HP
3PAR InForm OS Common Criteria Administrator’s Reference for more information before using
this command in Common Criteria mode.
SYNTAX
The syntax for the setrcopytarget command can be one of the following:
• setrcopytarget pol <policy> <target_name>
• setrcopytarget name <new_name> <target_name>
• setrcopytarget tput <tput_value> <target_name>
• setrcopytarget tunelinks <bandwidth> <latency> <target_name>
• setrcopytarget enable|disable <target_name>
AUTHORITY
• Super, Edit
• Any role granted the rcopytarget_set right.
NOTE: You need access to all domains in order to run this command.
SUBCOMMANDS
pol
Sets the policy for the specified target using the <policy> specifier.
name
Changes the name of the indicated target using the <new_name> specifier.
tput
Sets the maximum throughput value for the target's links.
tunelinks
Adjust performance values for the target's links using the <bandwidth> and <latency> specifiers.
enable|disable
Enables or disables the target.
OPTIONS
None.
SPECIFIERS
<target_name>
Specifies the target name for the target definition previously created with the creatercopytarget
command.
<policy>
This specifier can only be used with the pol subcommand. The policy can be one of the following:
mirror_config|no_mirror_config
320 Set Commands