HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

For Details SeeAuthorityDescriptionCommand
“showport” (page 438)Any role in the system.Displays system port
information.
showport
“showportarp” (page 446)Any role in the system.Shows the ARP table for
iSCSI ports in the system.
showportarp
“showportdev” (page 447)Any role in the system.Displays detailed
information about devices
on a Fibre Channel port.
showportdev
“showportisns” (page 449)Any role in the system.Show iSNS host information
for iSCSI ports in the system.
showportisns
“showportlesb” (page 450)Any role in the system.Displays Link Error Status
Block information about
showportlesb
devices on a Fibre Channel
port.
“showtarget” (page 481)Any role in the system.Displays unrecognized
targets.
showtarget
“statfcoe ” (page 536)Any role in the system.Shows Fibre Channel over
Ethernet information.
statfcoe
“statiscsi” (page 546)Any role in the system.Displays the iSCSI statistics.statiscsi
“statiscsisession” (page 548)Any role in the system.Displays the iSCSI session
statistics.
statiscsisession
1
You need access to all domains in order to run this command.
Battery Management
For Details SeeAuthorityDescriptionCommand
“setbattery” (page 282)Super, Service
1
Any role granted the
battery_set right.
Sets battery properties.setbattery
“showbattery” (page 352)Any role in the system.Displays battery status
information.
showbattery
1
You need access to all domains in order to run this command.
System Manager
For Details SeeAuthorityDescriptionCommand
“setsysmgr” (page 335)Super
1
Sets the system manager
startup state.
setsysmgr
Any role granted the
sysmgr_set right.
“showsysmgr” (page 479)Any role in the system.Displays the system manager
startup state.
showsysmgr
“showtoc” (page 488)Any role in the system.Displays the system table of
contents summary.
showtoc
“showtocgen” (page 489)Any role in the system.Displays the system table of
contents generation number.
showtocgen
26 Commands Quick Reference