HP 3PAR InForm OS 3.1.1 Command Line Interface Reference
Licensing Management Commands
For Details SeeAuthorityDescriptionCommand
“setlicense” (page 304)Super, Service
1
Any role granted the
license_set right.
Sets the license key.setlicense
“showlicense” (page 403)Any role in the system.Displays the installed license
info or key.
showlicense
1
You need access to all domains in order to run this command.
Node Subsystem Management Commands
Firmware Versions
For Details SeeAuthorityDescriptionCommand
“showfirmwaredb”
(page 382)
Any role in the system.Displays a current database
of firmware levels.
showfirmwaredb
Node Date Information
For Details SeeAuthorityDescriptionCommand
“setdate” (page 295)Super, Service
1
Any role granted the
date_set right.
Sets the system time and
date on all nodes.
setdate
“showdate” (page 371)Any role in the system.Displays the date and time
on all system nodes.
showdate
1
You need access to all domains in order to run this command.
Controller Node Properties
For Details SeeAuthorityDescriptionCommand
“setnode” (page 309)Super, Service
1
Any role granted the
node_set right.
Sets the properties of the
node components such as
the serial number of the
power supply.
setnode
“shownode” (page 407)Any role in the system.Displays an overview of the
node specific properties.
shownode
“shownodeenv” (page 415)Any role in the system.Displays the node’s
environmental status.
shownodeenv
1
You need access to all domains in order to run this command.
Controller Node EEPROM Log
For Details SeeAuthorityDescriptionCommand
“showeeprom” (page 376)Any role in the system.Displays node EEPROM
information.
showeeprom
24 Commands Quick Reference