HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

3 Commands Quick Reference
Overview
The InForm CLI provides a host of commands allowing you to administer your HP 3PAR Storage
System. To facilitate your navigation through this manual, this section provides an overview of the
commands grouped by functionality.
Disk Enclosure Management Commands
Drive Cage Management
For Details SeeAuthorityDescriptionCommand
“locatecage” (page 210)Super, Service
1
Any role granted the
cage_locate right.
Locates a particular drive
cage.
locatecage
“setcage” (page 284)Super, Service
1
Any role granted the
cage_set right.
Sets parameters for a drive
cage.
setcage
“showcage” (page 359)Any role in the system.Displays drive cage
information.
showcage
1
You need access to all domains in order to run this command.
Physical Disk Management
For Details SeeAuthorityDescriptionCommand
“admitpd” (page 47)Super, Service
1
Admits one or all physical
disks to enable their use.
admitpd
Any role granted the
pd_admit right.
“checkpd” (page 65)Super, Service
1
Executes surface scans on
physical disks.
checkpd
Any role granted the
pd_check right.
“controlpd” (page 85)Super, Service
1
Any role granted the
pd_control right.
Spins physical disks up or
down.
controlpd
“dismisspd” (page 162)Super, Service
1
Any role granted the
pd_dismiss right.
Dismisses one or more
physical disks from use.
dismisspd
“setpd” (page 314)Super, Service
1
Marks physical disks as
allocatable for logical disks.
setpd
“showpd” (page 418)Any role in the system.Displays physical disks in the
system.
showpd
20 Commands Quick Reference