HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

dismissrcopylink
DESCRIPTION
The dismissrcopylink command removes one or more links (connections) to a target system.
NOTE: Remote Copy is not part of the Common Criteria evaluated configuration. See the HP
3PAR InForm OS Common Criteria Administrator’s Reference for more information before using
this command in Common Criteria mode.
SYNTAX
• Syntax for Remote Copy over IP (RCIP) is as follows:
dismissrcopylink <target_name> <N:S:P:IP_address>...
• Syntax for Remote Copy over Fibre Channel (RCFC) is as follows:
dismissrcopylink <target_name> <N:S:P:WWN>...
AUTHORITY
• Super, Edit
• Any role that is granted the rccopylink_dismiss right.
NOTE: You need access to all domains in order to run this command.
OPTIONS
None.
SPECIFIERS
<target_name>
Specifies the name of the target from which the link(s) will be dismissed (See “creatercopytarget”
(page 128)).
<N:S:P:IP_address>...
Specifies the node, slot, and port of the Ethernet port on the local system and an IP address of the
peer port on the target system.
<N:S:P:WWN>...
Specifies the node, slot, and port of the Fibre Channel port on the local system and a World Wide
Name (WWN) of the peer port on the target system.This specifier can be repeated.
RESTRICTIONS
• Access to all domains is required to run this command.
• Functionality of this command requires a 3PAR Remote Copy license. Contact your local service
provider for more information.
• This command cannot be used to remove the last link of a target system with started groups.
• This command terminates with a list of one or more links to be dismissed.
EXAMPLES
The following example removes the link from node 1 of System2:
cli% dismissrcopylink System2 1:193.1.2.11
dismissrcopylink 163