HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

creatercopytarget
DESCRIPTION
The creatercopytarget command creates a Remote Copy target definition.
NOTE: Remote Copy is not part of the Common Criteria evaluated configuration. See the HP
3PAR InForm OS Common Criteria Administrator’s Reference for more information before using
this command in Common Criteria mode.
SYNTAX
The syntax for the creatercopytarget command can be one of the following:
• Syntax for Remote Copy over IP (RCIP) is as follows:
creatercopytarget [options] <target_name> IP
[<node:slot:port:IP_address>...]
• Syntax for Remote Copy over Fibre Channel (RCFC) is as follows:
creatercopytarget [options] <target_name> FC <node_WWN>
[<node:slot:port:WWN>...]
AUTHORITY
• Super, Edit
• Any role that is granted the rcopytarget_create right.
NOTE: You need access to all domains in order to run this command.
OPTIONS
-disabled
Create the target in disabled mode.
SPECIFIERS
<target_name>
The name of the target definition to be created, specified by using up to 31 characters. See the
HP 3PAR Remote Copy Software User’s Guide for suggested target naming conventions.
<node_WWN>
The system’s node World Wide Name (WWN) on the target system (Fibre Channel target only).
<node:slot:port:IP_address>
Specifies the node, slot, and port of the Ethernet port on the local system and an IP address of the
peer port on the target system.
<node:slot:port:WWN>
Specifies the node, slot, port of the Fibre Channel port on the local system and a World Wide
Name (WWN) address on the target system.
RESTRICTIONS
• Access to all domains is required to run this command.
• Functionality of this command requires the 3PAR Remote Copy license. Contact your local
service provider for more information.
128 Create Commands