HP 3PAR InForm Management Console 4.2.1 Software User's Guide (QL226-96251, December 2011)

DescriptionColumnGroup
The maximum rate in Gbps.Max Rate
The port type, Fibre Channel (FC),
iSCSI, Remote Copy over IP (RCIP), or
TypePorts
Remote Copy over Fibre Channel
(RCFC).
The connected device type, Free, Disk,
Host, or InServ.
Connected Device Type
The speed of the port in Gbps.Speed
The number of ports.Count
Viewing Controller Node Power Supplies Details
To view the Controller Node Power Supplies details screen:
1. Access the Controller Nodes screen.
2. In the upper pane, click the Summary tab.
3. Select a node.
4. In the lower pane, click the Power Supplies tab.
The Power Supplies tab appears as follows:
The Power Supplies tab provides the following information:
DescriptionColumn
The node ID.Node ID
The power supply ID.Power Supply ID
The power supply serial number.Serial Number
The state of the power supply. See “System and Component
Status Icons” (page 41) .
State
LED indicating when the node power supply can be
replaced.
Service LED*
The fan state, Normal, Degraded, or Failed. See “System
and Component Status Icons” (page 41) .
Fan State
The current fan speed.Fan Speed
The power supply battery state, Normal, Degraded, or
Failed. See “System and Component Status Icons”
(page 41) .
Battery State
*Indicates the column is for V-Class systems.
Viewing Controller Nodes 67