HP 3PAR InForm Management Console 4.2.1 Software User's Guide (QL226-96251, December 2011)

33 Working with VLUNs
When working with VLUNs, you can:
“Viewing VLUNs” (page 203)
“Creating VLUNs” (page 206)
“Removing VLUNs” (page 206)
Viewing VLUNs
To view system VLUNs:
1. In the Manager Pane, click Provisioning.
2. In the Management Tree, click VLUNs under the system node you wish to view.
The VLUNs screen provides VLUN information on three tabs, “Active VLUNs” (page 141) , “VLUN
Templates” (page 141) , and “Path Summary” (page 142) .
NOTE: In addition to providing comprehensive information about a system's VLUNs, the InForm
Management Console also allows you to access the same type of information for Remote Copy
VLUNs by selecting the Remote Copy child node under the VLUNs node in the Management Tree.
Active VLUNs Tab
The Active VLUNs tab can be filtered to display Summary information and Remote Copy information.
Displaying Summary Information
The Active VLUNs tab for summary information appears as follows:
The following information is displayed on the Active VLUNs tab:
DescriptionColumn
The name of the system.System Name
The exported Logical Unit Number (LUN) value.LUN
The name of the virtual volume.Virtual Volume
The VLUN RAID type.RAID Type
The name of the host to which the VLUN is exported.Host
The system port on which the VLUN is exported.Port
Viewing VLUNs 203