HP 3PAR InForm Management Console 4.2.1 Software User's Guide (QL226-96251, December 2011)

The following information is displayed in the lower pane's Settings tab:
DescriptionFieldGroup
Indicates if the selected volume is fully
provisioned or a thinly provisioned
virtual volume.
ProvisioningUser Space Provisioning
The name of the Common Provisioning
Group (CPG) from which user space is
provisioned.
CPG
If enabled, the allocation warning
percentage.
Allocation Warning
If enabled, the allocation limit.Allocation Limit
The disk type, Fibre Channel (FC),
Nearline (NL), or Solid State (SSD).
Device TypeUser Space Allocation
The speed of the disk.Device RPM
NOTE: The Device RPM number does not represent a rotational speed for the
drives without spinning media (SSD). It is meant as a rough estimation of the
performance difference between the drive and the other drives in the system.
For FC and NL drives, the number corresponds to both a performance measure
and actual rotational speed. For an SSD drive, the number is to be treated as
relative performance benchmark that takes into account in I/O per second,
bandwidth, and the access time.
The RAID type of the disk.RAID Type
The availability characteristics.Configured Availability
The availability of Disk, Port, Cage, or
Mag.
Availability
The set size.Set Size
The number of contiguous bytes in KB.Step Size
Indicates if the selected volume is fully
provisioned or a thinly provisioned
virtual volume.
ProvisioningCopy Space Provisioning
The name of the Common Provisioning
Group (CPG) from which user space is
provisioned.
CPG
If enabled, the allocation warning
percentage.
Allocation Warning
Viewing the Virtual Volumes Tab 181