HP 3PAR FalconStor CDP NSS Implementation Guide

The following HP 3PAR Storage System InForm OS CLI commands show an example of creating
and presenting LUNs to the FalconStor environment.
cli% createcpg ipstor
cli% createvv ipstor ipstor1_config_lun 5g
cli% createvv ipstor ipstor2_config_lun 5g
cli% createvv ipstor ipstor1_data_lun_05 5g
cli% createvv ipstor ipstor2_data_lun_06 5g
cli% createvlun ipstor1_config_lun 1 ipstor1
cli% createvlun ipstor1_config_lun 1 ipstor2
cli% createvlun ipstor2_config_lun 2 ipstor1
cli% createvlun ipstor2_config_lun 2 ipstor2
cli% createvlun ipstor1_data_lun_05 5 ipstor1
cli% createvlun ipstor1_data_lun_05 5 ipstor2
cli% createvlun ipstor2_data_lun_06 6 ipstor1
cli% createvlun ipstor2_data_lun_06 6 ipstor2
cli% showvlun
Active VLUNs
Lun VVName HostName -Host_WWN/iSCSI_Name- Port Type
1 ipstor1_config_lun ipstor1 2100001B32826F95 1:4:1 host
2 ipstor2_config_lun ipstor1 2100001B32826F95 1:4:1 host
5 ipstor1_datalun_05 ipstor1 2100001B32826F95 1:4:1 host
6 ipstor2_datalun_06 ipstor1 2100001B32826F95 1:4:1 host
1 ipstor1_config_lun ipstor1 2100001B32826F95 0:2:1 host
2 ipstor2_config_lun ipstor1 2100001B32826F95 0:2:1 host
5 ipstor1_datalun_05 ipstor1 2100001B32826F95 0:2:1 host
6 ipstor2_datalun_06 ipstor1 2100001B32826F95 0:2:1 host
1 ipstor1_config_lun ipstor2 2100001B32846099 1:4:1 host
2 ipstor2_config_lun ipstor2 2100001B32846099 1:4:1 host
5 ipstor1_datalun_05 ipstor2 2100001B32846099 1:4:1 host
6 ipstor2_datalun_06 ipstor2 2100001B32846099 1:4:1 host
1 ipstor1_config_lun ipstor2 2100001B32846099 0:2:1 host
2 ipstor2_config_lun ipstor2 2100001B32846099 0:2:1 host
5 ipstor1_datalun_05 ipstor2 2100001B32846099 0:2:1 host
6 ipstor2_datalun_06 ipstor2 2100001B32846099 0:2:1 host
--------------------------------------------------------------------
16 total
Discover Storage Resource on the FalconStor CDP/NSS Appliance
Using the FalconStor Management Console, perform a rescan on the physical adapters and specify
a LUN range based on the LUN numbers that were exported from the HP 3PAR Storage System.
Refer to FalconStor CDP/NSS documentation on discovering and admitting the LUN devices.
Configure admitted LUNs according to their intended functions based on the needs of your
organization. For example, some LUNs can be admitted and configured as dedicated configuration
LUNs for HA failover while other LUNs can be virtualized into a larger shared storage pool for
allocation to SAN clients.
There are no special considerations for the HP 3PAR Storage System besides the standard setup
procedures described in this implementation guide.
12 Configuring the HP 3PAR Storage System and FalconStor CDP/NSS for Fibre Channel