HP 3PAR CIM API Programming Reference

1. TPD_FCPort of an FCoE port has an extra TPD_FCPortEthernetPortDependency association
with a TPD_EthernetPort.
2. TPD_FCPort.PortDiscriminator property has a value of 10 (FCoE) for FCoE port and 2 (Not
Applicable) for FC port.
FC Initiator Ports Subprofile
The FC Initiator Ports subprofile models Fibre Channel specific aspects of a storage system. This
subprofile provides information about the backend Fibre Channel ports that are used to connect
to the storage system controller nodes to backend Disk Enclosures (Drive Cages).
For detailed information regarding the FC Target Ports subprofile, refer to SMI-S at www.snia.org.
FC Initiator Ports Subprofile CIM Classes
Table 85 FC Initiator Ports Subprofile CIM Classes
DescriptionClass
The storage array on which the initiator ports reside.TPD_StorageSystem
A SCSI transport endpoint. In this context, this represents
an initiator port on the HP 3PAR Storage System.
TPD_SCSIProtocolFCEndpoint
A Fibre Channel Port residing on the
TPD_StorageSystem.
TPD_FCPort
Supported Methods
Table 83 (page 95) describes the supported methods of the Fibre Channel initiator ports subprofile:
Table 86 Methods for TPD_StorageSystem
DescriptionMethod
Provides the ability to set owner and contact information
for the StorageSystem.
modifyInstance()
iSCSI Target Ports Subprofile
The iSCSI Target Ports subprofile models iSCSI specific aspects of a target storage system. This
subprofile provides information about FC ports on a storage system that are connected to hosts or
FC switches.
The Multiple Computer System subprofile models the underlying systems or controllers that cooperate
to present a single, top-level system (cluster) which provides for added redundancy or increased
functionality.
For detailed information regarding the FC Target Ports subprofile, refer to SMI-S at http://
www.snia.org.
The CIM Server supports the Multiple Computer System subprofile as defined in SMI-S v1.1.0. This
subprofile provides information about the controller nodes that comprise the storage system cluster.
The cluster is modeled as multiple tiers with each tier representing a pair of controller nodes.
iSCSI Target Ports Subprofile CIM Classes
Table 87 iSCSI Target Ports Subprofile Key CIM Classes
DescriptionClass
The storage array on which the target ports reside.TPD_StorageSystem
An iSCSI transport endpoint. Represents an iSCSI port.TPD_iSCSIProtocolEndpoint
96 CIM API SMI-S Support