HP 3PAR CIM API Programming Reference

TPD_SAPAvailableForRemoteReplicationGroup
This is the association between RemoteReplicationGroup and the SCSIProtocolEndpoint, sub-classed
from CIM_SAPAvailableForElement. The endpoints denotes the port used for remote replication.
DescriptionProperty
Reference to RemoteReplicationGroupManagedElement
Reference to:AvailableSAP
• TPD_SCSIProtocolFCEndpoint if RCFC
• TPD_IPProtocolEndpoint if RCIP
Please note that this association exists only for the RemoteReplicationGroup residing on the local
array.
Thin Provisioning Profile
Support for Thin Provisioning objects such as TPD_DynamicStoragePool and thinly provisioned
TPD_StorageVolume are described in the Block Services Package chapter.
SAS Initiator Ports Profile
The FC Initiator Ports subprofile models Serial Attached SCSI (SAS) ports that initiates commands
to backend cage. This subprofile provides information about the backend SAS ports that are used
to connect StoreServ Storage Controller Nodes to backend Disk Enclosures (Drive Cages). For
detailed information regarding the SAS Initiator Ports profile, please refer to SMI-S at
http://www.snia.org.
Table 117 SAS Initiator Ports Profile ClM Classes
DescriptionClass
The logical aspect of the physical SAS portTPD_SASPort
A SCSI transport endpoint. In this context, this represents
an initiator SAS port on the storage system.
TPD_SASProtocolEndpoint
A PHY on the SAS expanderTPD_SASPHY
Statistics for a SAS portTPD_SASPortStatistics
Statistics for a SAS PHYPD_SASPhyStatistics
Associates system to initiator SAS portsTPD_SystemSASPort
Associates system to initiator SAS PHYSTPD_SystemSASPHY
Associates SASPort and SASPHYTPD_SASPortComponent
Connects initiator SASPort and SASProtocolEndpointTPD_SASPortSAPImplementation
Associates system to initiator SASProtocolEndpointTPD_HostedSASProtocolEndpoint
Connects SASPort and SASPortStatisticsTPD_SASPortElementStatisticalData
Associates SASPHY and SASPhyStatisticsTPD_SASPHYElementStatisticalData
Supported Methods
Please refer to the SMI-S, version 1.5 at http://www.snia.org for the Fibre Channel Initiator Instance
Diagram.
142 CIM API SMI-S Support