HP 3PAR AIX and IBM Virtual I/O Server Implementation Guide

8. To verify that the AIX or IBM Virtual I/O Server host recognizes multiple paths, issue lspath
–l hdiskX where X is the HP 3PAR StoreServ Storage volume for the host boot.
# lspath -l hdisk0
Enabled hdisk0 fscsi0
Enabled hdisk0 fscsi1
Enabled hdisk0 fscsi2
Enabled hdisk0 fscsi3
9. Issue bosboot -aDd /dev/ipldevice on the AIX or IBM Virtual I/O Server CLI.
10. Reboot the AIX or the IBM Virtual I/O Server system.
All HP 3PAR StoreServ Storage virtual volumes, including the selected HP 3PAR StoreServ Storage
boot volumes and any additional paths are now configured with the HP 3PAR PCM.
46 Booting from the HP 3PAR StoreServ Storage