HP 3PAR AIX and IBM Virtual I/O Server Implementation Guide

Enabled hdisk1 fscsi4 21510002ac0000b3,0
Enabled hdisk1 fscsi5 20510002ac0000b3,0
Enabled hdisk1 fscsi5 20410002ac0000b3,0
Enabled hdisk1 fscsi5 21210002ac0000b3,0
Enabled hdisk1 fscsi5 21410002ac0000b3,0
Enabled hdisk1 fscsi5 21510002ac0000b3,0
• To display the basic path status for ALL MPIO devices, issue the command lspath.
# lspath
Enabled hdisk0 sas0
Enabled hdisk1 fscsi4
Enabled hdisk2 fscsi4
Enabled hdisk1 fscsi4
Enabled hdisk2 fscsi4
Enabled hdisk1 fscsi4
Enabled hdisk2 fscsi4
Enabled hdisk1 fscsi4
Enabled hdisk2 fscsi4
Enabled hdisk1 fscsi4
Enabled hdisk2 fscsi4
Enabled hdisk1 fscsi5
Enabled hdisk2 fscsi5
Enabled hdisk1 fscsi5
Enabled hdisk2 fscsi5
Enabled hdisk1 fscsi5
Enabled hdisk2 fscsi5
Enabled hdisk1 fscsi5
Enabled hdisk2 fscsi5
Enabled hdisk1 fscsi5
Enabled hdisk2 fscsi5
Additional Modules Available with HP 3PAR ODM for AIX
In the event of a failure, the customer support representative requires access to information regarding
the installation and configuration of the AIX or IBM Virtual I/O Server host. To access this
information, use the utility 3par_explorer.sh.
This utility is located in /usr/lpp/3PARmpio/bin.
Additional information regarding HP 3PAR MPIO utilities and other useful information can be found
in the HP 3PAR ODM 3.1 Software for IBM documentation. This documentation is located on the
HP Software Depot at:
HP 3PAR ODM 3.1 Software for IBM MPIO and Veritas VxDMP
Additional HP 3PAR ODM Settings
For details about AIX HP 3PAR ODM, see the HP 3PAR ODM 3.1 Software for IBM documentation.
This documentation is located on the HP Software Depot at:
HP 3PAR ODM 3.1 Software for IBM MPIO and Veritas VxDMP
Installing HP 3PAR ODM for AIX MPIO on the AIX Server (Local Boot Drive) when Using HP 3PAR OS 3.1.x or OS 2.3.x 23