3PAR InForm OS 2.3.1 Upgrade Pre-Planning Guide

11
InForm OS Version 2.3.1 Release 2.3.1 Upgrade Pre-Planning Guide
3.2.1 InForm OS 2.3.1 Persona Changes
Use Table 1-1 below when migrating from InForm OS 2.2.x to 2.3.1. The change occurs
automatically as part of the Rolling Upgrade or by Offline Upgrade.
NOTE: VCN will be disabled by default on all ports when InServ Storage Server
migration to 2.3.1 completes.
Table 1-1. Persona Translation Table
2.2.x
Port Persona - Topology
2.3.1
Host Persona - Topology
0 - Loop (No persona) - Loop
1, 2, 3, 4 - Loop 6 (Generic - Legacy) - Loop
5 (HPUX) - Loop 7 (HPUX - Legacy) - Loop
8 (HPUX) - Point 7 (HPUX -Legacy) - Point
7, 9, 10, 15 - Point 6 (Generic - Legacy) - Point
11 (Egenera) - Loop 9 (Egenera) - Loop
12 (Egenera) - Point 9 (Egenera) - Point
13 (AIX) - Loop 8 (AIX - Legacy) - Loop
14 (AIX) - Point 8 (AIX - Legacy) - Point
18 (NetApp) - Loop 10 (ONTAP - Legacy) - Loop
19 (NetApp) - Point 10 (ONTAP - Legacy) - Point
16 (RCFC) - Loop (No persona) - Loop
17 (RCFC) - Point (No persona) - Point
All iSCSI configurations 6 (Generic - Legacy)