3PAR InForm® OS 2.3.1 MU1/MU2 P14 Release Notes 3PAR Inc.
Changes The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, 3PAR Inc. assumes no liability resulting from errors or omissions in this document or from the use of the information contained herein. 3PAR reserves the right to make changes in the product design without reservation and without notification to its users.
InForm OS Version 2.3.1 Release 2.3.1 MU1/MU2 P14 Release Notes These release notes are for the Maintenance Update 1 and 2 (MU1/MU2) Patch 14 (P14) of the 3PAR InForm OS 2.3.1. 1.0 Supported Platforms The 3PAR Configuration Matrix for InForm OS 2.3.1 contains information about supported hardware and software platforms. Contact your local sales engineer or service representative to obtain a copy, or find it online at http://www.3par.com.
Release 2.3.1 MU1/MU2 P14 Release Notes InForm OS Version 2.3.1 4.0 Modifications to the InForm OS The following items have been addressed in this release. Bug ID Item Description 58751 Drives cannot be The A3GG firmware packaged with 2.3.1 P11 had admitted to the InServ resulted in an incorrect setting of BR-2401. This after upgrading the caused the drive to use a WWN generated by the Hitachi 2TB drive bridge and was reset or power cycled.
