3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

6.8
Using the Component LEDs
Messages and Operator’s Guide InForm OS Version 2.3.1
Rapid toggle between
amber and green light
Indicates a cage firmware upgrade
initiated by the upgradecage CLI
command. A firmware upgrade
normally takes less than two
minutes to complete.
Hot-plug Steady amber light Indicates FC-AL module is prepared
for replacement (hot plug).
No light Indicates FC-AL module is not
prepared for hot plug.
Split Mode Green light Indicates the drive cage is split into
two logical portions.
No light Indicates the drive cage is not split.
Table 6-1. DC2 Drive Cage FC-AL Module LED Displays (continued)
LED Appearance Meaning