3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

ManualsBrandsHP ManualsSoftwareHP 3PAR Operating System Software

5.9

Understanding Component Numbering

InForm OS Version 2.3.1 Messages and Operator’s Guide

5.3.3 Controller Node Numbering

The InServ F-Class Storage Server contains two or four nodes per system.

Controller nodes are numbered from top to bottom node 0 and node 1 for a two node system,

and node 0, node 1, node 2, node 3 for a four node system.

Figure 5-7. Numbering of Controller Nodes

0702_L_R2

F400 Cabinet

PDU 2

PDU 3

PDU 0

PDU 1

Service Processor

1U Empty

Drive Chassis 3

Drive Chassis 2

Drive Chassis 1

Drive Chassis 0

Drive Chassis 4

Drive Chassis 5

Drive Chassis 6

2U Empty

Node 3

Node 2

Node 0

Node 1

Drive Chassis 7