3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

viii
Table of Contents
Messages and Operator’s Guide InForm OS Version 2.3.1
8.2 Service Processor LEDs 8.22
8.2.1 Wintec Service Processor 8.22
8.2.2 Supermicro Service Processor 8.23
8.2.3 Supermicro II Service Processor 8.25
8.3 Securing the Storage Server 8.26
9 Understanding F-Class LED Status
9.1 Using the Component LEDs 9.2
9.1.1 Bezel LEDs 9.2
9.1.2 Removing the Bezels and Unlocking the Door 9.4
9.1.3 Drive Chassis LEDs 9.4
9.1.4 Drive Magazine LEDs 9.12
9.1.5 Controller Node LEDs 9.14
9.1.6 3PAR Fibre Channel Port LEDs 9.16
9.1.7 QLogic iSCSI Port LEDs 9.17
9.1.8 Emulex Fibre Channel Port LEDs 9.18
9.1.9 Controller Node Power Supply LEDs 9.19
9.1.10 Power Distribution Unit Lamps 9.20
9.2 Service Processor LEDs 9.21
9.2.1 Supermicro Service Processor 9.21
9.2.2 Supermicro II Service Processor 9.22
9.3 Securing the Storage Server 9.24
10 Power Off/On Procedures
10.1 Powering Off the Storage Server 10.1
10.2 Powering On the Storage Server 10.4
11 Troubleshooting
11.1 Overview 11.1
11.2 The checkhealth Command 11.2
11.3 Using the checkhealth Command 11.2
11.4 Troubleshooting InServ Storage Server Components 11.4