3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

4.16
Understanding Component Numbering
Messages and Operator’s Guide InForm OS Version 2.3.1
4.3.5 Power Supply Numbering
InServ E-Class Storage Server cabinets share a single power domain that contains a drive cage
or controller node and two dedicated power supplies. Drive cages and controller nodes
depend on these two power supplies to supply power from the PDUs at the bottom of the
cabinet. When viewing the cabinet from the rear, the power supplies are numbered as follows
(Figure 4-15):
4 7 9, 13
8 2, 6
Table 4-1. Drive Magazine Loading Pattern (continued)
Group Number
Drive Magazine Pair
Number
Drive Magazine Bay
NOTE: The loading sequence displayed in the table above indicates that the
loading order is in vertical columns. All drives in a vertical column must be of the
same type and speed. Mixing drive types and speeds in the same column may
cause unpredictable results.