3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

3.8
Understanding Component Numbering
Messages and Operator’s Guide InForm OS Version 2.3.1
Figure 3-7. Numbering of PDUs
Each PDU has two power banks, each with a separate circuit breaker, to be used exclusively for
storage server components (Figure 3-8).
Figure 3-8. Power Banks in the PDU
0216_L_R1
PDUs
0
1
2
3
NOTE: For T800 Storage Servers, PDUs are positioned back-to-back so that they
only take up 2U of space at the bottom of the cabinet rather than the standard
4U of space. PDUs are accessible from both the front of the storage server and the
rear. Figure 3-5 illustrates PDU placement for an T800 storage server.
0221_L_R1
Power Bank 2Power Bank 1
WARNING: To avoid possible injury, damage to storage server equipment, and
potential loss of data, do not use the surplus power outlets in the storage server
PDUs. Never use outlets in the PDUs to power components that do not belong to
the storage server or to power storage server components that reside in other
cabinets.