3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

12.12
InForm OS Version 2.3.1 Messages and Operator’s Guide
MESSAGE CODE
0x250002
TYPE
Remote Copy link status
MESSAGE
The Remote Copy link <remote_copy_link_process_name> has changed its
status to DOWN.
SUGGESTED ACTION
The remote copy link has been disconnected. This could be the result of a CLI command (any
command that stops a link), or it could be the result of an actual network failure or loss of the
remote system. In the latter case, the customer should attempt to determine what caused the
network failure and attempt to correct the situation.