3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

12.86
Messages and Operator’s Guide InForm OS Version 2.3.1
SUGGESTED ACTION
Internal midplane hardware error. Error 1 or 17: runtime variables could not be read. Replace
midplane.
MESSAGE 23
POST Env Init <error> <code>.
SUGGESTED ACTION
Internal midplane hardware error. Error 10, 11, or 20: I2C failed to PROM device. Replace
midplane.
MESSAGE 24
POST FPGA Init <error> <code>.
SUGGESTED ACTION
Internal midplane hardware error. Communication with FPGA failed. Replace midplane.
MESSAGE 25
POST Watchdog Init <error> <code>.
SUGGESTED ACTION
Internal midplane hardware error. CPU watchdog initialization failed. Replace midplane.
MESSAGE 26
POST IRQ Enable <error> <code>.
SUGGESTED ACTION
Internal midplane hardware error. CPU interrupts could not be enabled. Replace midplane.
MESSAGE 27
POST IRQ Test <error> <code>.
SUGGESTED ACTION
Internal midplane hardware error. CPU interrupt test failed. Replace midplane.
MESSAGE 28
POST SRAM Test <error> <code>.