3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

12.78
Messages and Operator’s Guide InForm OS Version 2.3.1
MESSAGE CODE
0x1b00de
TYPE
Component State Change.
MESSAGE
Node <node_id> Power Supply <power_supply_id> Degraded (<list of
states>)
STATE 1
Not Present
SUGGESTED ACTION
Make sure the power supply is fully seated. If the power supply is fully seated, disconnect and
reconnect the cables. If problem persists, replace power supply. Contact your local service
provider for technical support and services.
STATE 2
Oscillating Presence
SUGGESTED ACTION
Make sure the power supply is fully seated. If the power supply is fully seated, disconnect and
reconnect the cables. If problem persists, replace power supply. Contact your local service
provider for technical support and services.
STATE 3
Oscillating DC Failure
SUGGESTED ACTION
Make sure the power supply is fully seated. If the power supply is fully seated, disconnect and
reconnect the cables. If problem persists, replace power supply. Contact your local service
provider for technical support and services.
STATE 4
Oscillating AC Failure