3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

12.75
InForm OS Version 2.3.1 Messages and Operator’s Guide
MESSAGE CODE
0x1a00fa
TYPE
Component State Change
MESSAGE
Node <node_id> Failed (<list of states>)
STATE 1
Link Error
SUGGESTED ACTION
Could not establish communication between node ‘x’ and node ‘y’. If node ‘y’ is turned off,
there is no SUGGESTED action required. If node ‘y’ is turned on, make sure node ‘y’ is properly
inserted into the slot. Contact your local service provider for technical support and services.
STATE2
Uncorrectable Memory Error
SUGGESTED ACTION
The reported DIMM should be replaced. Contact your local service provider for technical
support and services.
STATE 3
Multiple Uncorrectable Memory Error
SUGGESTED ACTION
The reported DIMM should be replaced. Contact your local service provider for technical
support and services.
STATE 4
Internal System Error
SUGGESTED ACTION
Contact your local service provider for technical support and services.
STATE 5
Hardware Watchdog Error