3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

12.74
Messages and Operator’s Guide InForm OS Version 2.3.1
temperature. If the temperature continues to exceed the limit, contact your local service
provider for technical support and services.
If a voltage limit has been exceeded, contact your local service provider for technical support
and services.
STATE 5
Control Cache DIMM Overheating
SUGGESTED ACTION
Use the shownodeenv command to view current system temperatures and voltages. If a
temperature limit has been exceeded, verify the system has adequate ventilation and ambient
temperature. If the temperature continues to exceed the limit, contact your local service
provider for technical support and services.
If a voltage limit has been exceeded, contact your local service provider for technical support
and services.
1)
STATE 6
Node Offline Due to Failure
SUGGESTED ACTION
If the node doesn't come back up within 1 hour, contact 3PAR technical support.
STATE 7
Node Shutdown Manually
SUGGESTED ACTION
If the node doesn't come back up after maintenance has been completed, contact 3PAR
technical support.