3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

12.70
Messages and Operator’s Guide InForm OS Version 2.3.1
MESSAGE CODE
0x1a0008
TYPE
Node environmental
MESSAGE
Node#: <Error Code>: <status> <Expected>: <Reading>, hi_limit: <Hi
Limit>, lo_limit: <Lo Limit>
Where:
<
Error Code> is:
<Status> is:
Table 12-1.
I2C_OK = 0x00 TE_PASS (0)
I2C_BUS_ERR = 0x37,
I2C_DEV_ERR = 0x38,
I2C_HOST_BUSY = 0x39,
I2C_BUSY_IN_BIOS = 0x3A,
TEMP_VCC_FAIL = 0x3B,
I2C_ERR = 0x3C,
Table 12-2.
OVER LIMIT <Hi Limit>
UNDER LIMIT <Lo Limit>
Within Tolerance = 0x38,