3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

12.15
InForm OS Version 2.3.1 Messages and Operator’s Guide
MESSAGE CODE
0x50005
TYPE
Ldsk has failed set
MESSAGE
Log LD 0 (log0.0) has a failed raid set: 0. Reason pd 2 ch 544 is stale
(media valid, disk missing, pderr 1) pd 21 ch 500 is stale (media valid,
disk missing, pderr 1)
SUGGESTED ACTION
1 Ensure there are no logging chunklets or failed/degraded disks.
2 If the RAID set is still stale, fix the issue that caused the to go stale.
3 Remove the Log Ld using the
removeld -rmsys command.
4 Use the
admithw command to create a new Log Ld.
If this does not resolve the issue, contact 3PAR engineering for support.