3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

12.13
InForm OS Version 2.3.1 Messages and Operator’s Guide
Contact your local service provider for technical support and services.
STATE 3
Snapdata Invalid
SUGGESTED ACTION
The VV specified in the alert has snapshots that cannot be started up because the snapshot
data is invalid.
Contact your local service provider for technical support and services.
STATE 4
Preserved
SUGGESTED ACTION
The VV specified in the alert is in a cache-preserved mode because there are some I/O errors on
the underlying LDs. Use the CLI command
showvv <vvname> to confirm that the VV is still in
this state. Use the CLI commands
showld -vv <vvname> and showpd to obtain additional
data on the underlying errors. Once these errors are fixed, the VV will transition automatically
to the 'normal' state.
Contact your local service provider for technical support and services.
STATE 5
Stale
SUGGESTED ACTION
The snapshot VV specified in the alert is stale. Use the CLI command showvv <vvname> to
confirm that the VV is still in this state.
The snapshot VV is stale because at some point in the past, there were I/O errors on the
underlying LDs, or because the snapshot volume ran out of space. At this point, the only action
that can be taken on this VV is to delete it.
Contact your local service provider for technical support and services.
STATE 6
Copy Failed