3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

11.33
Troubleshooting InServ Storage Server Components
InForm OS Version 2.3.1 Messages and Operator’s Guide
11.4.10.1 Format of Possible RC Exception Messages
RC rc:<name> "All links for target <name> are down but target not yet marked failed."
RC rc:<name> "Target <name> has failed."
RC rc:<name> "Link <name> of target <target> is down."
RC rc:<name> "Group <name> is not started to target <target>."
RC rc:<vvname> "VV <vvname> of group <name> is stale on target <target>."
RC rc:<vvname> "VV <vvname> of group <name> is not synced on target <target>."
11.4.10.2 RC Example
Component -Description- Qty
RC Stale volumes 1
Component --Identifier--- ---------Description---------------
RC rc:yush_tpvv.rc VV yush_tpvv.rc of group yush_group.r1127
is stale on target S400_Async_Primary.
11.4.10.3 RC Suggested Action
Perform remote copy troubleshooting such as checking the physical links between InServ
Storage Servers, and using CLI commands such as showrcopy, showrcopy -d, showport -
rcip
, showport -rcfc, shownet -d, controlport rcip ping, etc.
11.4.11 SNMP
Displays issues with SNMP.
Attempts the
showsnmpmgr command and reports errors if the CLI returns an error.
11.4.11.1 Format of Possible SNMP Exception Messages
SNMP -- <err>
11.4.11.2 SNMP Example
Component -Identifier- ----------Description---------------
SNMP -- Could not obtain snmp agent handle. Could be
_______________________misconfigured.
11.4.11.3 SNMP Suggested Action
Any error message that can be produced by showsnmpmgr may be displayed.
11.4.12 Task
Displays failed tasks.
Checks for any tasks that have failed within the past 24 hours. This is the default time frame
for the
showtask -failed command.