3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

11.32
Troubleshooting InServ Storage Server Components
Messages and Operator’s Guide InForm OS Version 2.3.1
11.4.9.15 Port Example 7
Component ------------Description------------ Qty
Port Ports with mismatched mode and type 1
Component -Identifier- ------Description-------
Port port:2:0:3 Mismatched mode and type
11.4.9.16 Port Suggested Action 7
This output indicates that the port's mode, such as an initiator or target, is not correct for the
connection type, such as disk, host, iscsi or rcfc. Useful CLI commands are
showport,
showport -c, showport -par, showport -rcfc, showcage, etc.
cli% showport
N:S:P Mode State ----Node_WWN---- -Port_WWN/HW_Addr- Type
2:0:1 initiator ready 2FF70002AC000591 22010002AC000591 disk
2:0:2 initiator ready 2FF70002AC000591 22020002AC000591 disk
2:0:3 target ready 2FF70002AC000591 22030002AC000591 disk
2:0:4 target loss_sync 2FF70002AC000591 22040002AC000591 free
Component -Identifier- ------Description-------
Port port:0:1:1 Mismatched mode and type
cli% showport
N:S:P Mode State ----Node_WWN---- -Port_WWN/HW_Addr- Type
0:1:1 initiator ready 2FF70002AC000190 20110002AC000190 rcfc
0:1:2 initiator loss_sync 2FF70002AC000190 20120002AC000190 free
0:1:3 initiator loss_sync 2FF70002AC000190 20130002AC000190 free
0:1:4 initiator loss_sync 2FF70002AC000190 20140002AC000190 free
11.4.10 RC
Displays Remote Copy issues.
■ Checks Remote Copy targets
■ Checks Remote Copy links
■ Checks Remote Copy Groups and VVs
NOTE: A known problem exists when Remote Copy is configured on a fibre
channel adapter port. These ports will be flagged in error and these errors can be
ignored. This will be fixed in a future release.