3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

11.14
Troubleshooting InServ Storage Server Components
Messages and Operator’s Guide InForm OS Version 2.3.1
11.4.3.1 Format of Possible Date Exception Messages
Date -- "Date is not the same on all nodes"
11.4.3.2 Date Example
Component -Identifier- -----------Description-----------
Date -- Date is not the same on all nodes
11.4.3.3 Date Suggested Action
The time on the nodes should stay synchronized whether there is an NTP server or not. Use
showdate to see if a node is out of sync, and shownet and shownet -d to see the network
and NTP information.
cli% showdate
Node Date
0 2009-09-08 10:56:41 PDT (America/Los_Angeles)
1 2009-09-08 10:56:39 PDT (America/Los_Angeles)
cli% shownet
IP Address Netmask/PrefixLen Nodes Active Speed
192.168.56.209 255.255.255.0 0123 0 100
Duplex AutoNeg Status
Full Yes Active
Default route: 192.168.56.1
NTP server: 192.168.56.109
11.4.4 LD
Displays Logical Disks (LDs) that are not optimal.
■ Checks for preserved LDs
■ Checks that current and created availability are the same
■ Checks for owner and backup
■ Checks that preserved data space (pdsld's) is same as total data cache
■ Checks size and number of logging LDs
■ Checks that Logging LDs are the correct quantity and size
11.4.4.1 Format of Possible LD Exception Messages
LD ld:<ldname> "LD is not mapped to a volume"
LD ld:<ldname> "LD is in write-through mode"
LD ld:<ldname> "LD has <X> preserved RAID sets and <Y> preserved chunklets"