3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

11.2
The checkhealth Command
Messages and Operator’s Guide InForm OS Version 2.3.1
11.2 The checkhealth Command
COMMAND
checkhealth
DESCRIPTION
The checkhealth command checks and then displays the status of system hardware and
software components.
SYNTAX
checkhealth [<options> | <component>...]
AUTHORITY
Super, Service
OPTIONS
-list
Lists all components that checkhealth can analyze.
-quiet
Does not display which component is currently being checked.
-detail
Displays detailed information regarding the status of the system.
SPECIFIERS
<component>
Indicates the component to check. Use -list option to get the list of components.
11.3 Using the checkhealth Command
Use the checkhealth command without any specifiers to check the health of all the
components analyzed by the
checkhealth command. The following example displays both
summary and detailed information about the InServ Storage Server hardware and software
components: