3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

InForm OS Version 2.3.1 Messages and Operator’s Guide

11.1

Troubleshooting

In this chapter

11.1 Overview 11.1

11.2 The checkhealth Command 11.2

11.3 Using the checkhealth Command 11.2

11.4 Troubleshooting InServ Storage Server Components 11.4

This chapter provides information about troubleshooting an InServ Storage Server with the

checkhealth InForm CLI command.

11.1 Overview

The InForm OS CLI checkhealth command checks and then displays the status of InServ

Storage Server hardware and software components. For example, the

checkhealth

command can check for unresolved system alerts, display issues with hardware components, or

display information about virtual volumes that are not optimal. By default, the

checkhealth

command checks most InServ system components but you can also check the status of specific

components. For a complete list of system components analyzed by the

checkhealth

command, see Troubleshooting InServ Storage Server Components on page 11.4.