3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

9.22
Service Processor LEDs
Messages and Operator’s Guide InForm OS Version 2.3.1
9.2.2 Supermicro II Service Processor
The Supermicro II service processor LEDs are defined in the following section. The LEDs are
located at the top of the service processor (Figure 9-14).
Figure 9-14. Supermicro II Service Processor LEDs
NIC Port 1 No light Indicates the port is not connected.
Steady green light Indicates the port is connected.
Flashing green light Indicates there is network activity.
Overheat No light Indicates the service processor temperature
is normal.
Steady red light Indicates the service processor temperature
is overheating.
Table 9-11. Supermicro Service Processor Front-Panel Displays (continued)
LED Appearance Meaning
NIC Port 2 LED
NIC Port 1 LED
Overheat LED
0802_L_R1
Reset Button
Power Button