3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

9.16
Using the Component LEDs
Messages and Operator’s Guide InForm OS Version 2.3.1
9.1.6 3PAR Fibre Channel Port LEDs
The 3PAR Fibre Channel adapter contained in the controller node also contains Fibre Channel
port LEDs
Figure 9-8. 3PAR 4-Port Fibre Channel LEDs
Consult to verify the proper function of the 3PAR Fibre Channel adapter LED.
Ethernet activity Steady green light Indicates an Ethernet link.
Flashing green light Indicates no Ethernet activity.
No light Indicates no Ethernet connection.
Ethernet
10/100/1000 MB/sec
Steady amber light 1000 Mb/sec mode.
Steady green light 100 Mb/sec mode.
No light 10 Mb/sec mode (or disconnected).
Table 9-6. Controller Node LED Displays (continued)
LED Appearance Meaning
Table 9-7. 3PAR Fibre Channel Port Status LED indications (3PAR 4-Port Adapter)
LED Appearance Meaning
No Light Wake-up Failure (dead device).
Steady Green Light Normal -- Link up at 2-4 GB/sec.
Flashing Green Light Link down or not connected.
0720_L_R1
Port 4 Port 1
LED (4x)