3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

9.10
Using the Component LEDs
Messages and Operator’s Guide InForm OS Version 2.3.1
Host Port 2 Signal Good Steady green light Indicates the incoming Fibre
Channel signal is good.
Host Port 3 Signal Good Steady green light Indicates the incoming Fibre
Channel signal is good.
Loop Status Steady green light Indicates all device ports are good
at 2 Gb/s.
No light Indicates all device ports are good
at 1 Gb/s.
Flashing green light Indicates the drives are bypassed
by module.
Module Fault Steady amber light FCAL module is failed.
Table 9-3. Interface Card LED Meanings (continued)
LED Appearance Meaning