3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

9.9
Using the Component LEDs
InForm OS Version 2.3.1 Messages and Operator’s Guide
9.1.3.2 Interface Card LEDs
The drive chassis contains two interface cards, FCAL-A and FCAL-B. Interface card LEDs are as
follows:
Figure 9-4. Interface Card LEDs
Consult Table 9-3 for interface card LED meanings.
Table 9-3. Interface Card LED Meanings
LED Appearance Meaning
Host Port 0 Signal Good Steady green light Indicates the incoming Fibre
Channel signal is good.
Host Port 1 Signal Good Steady green light Indicates the incoming Fibre
Channel signal is good.
0350_L_R1
Host Port 0
Signal Good LED
Host Port 1
Signal Good LED
Module Fault LED
Host Port 2
Signal Good LED
Host Port 3
Signal Good LED
Loops Status LED