3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

9.7
Using the Component LEDs
InForm OS Version 2.3.1 Messages and Operator’s Guide
2 Gb Link
Speed LED
Steady
green light
Indicates the following:
■ Test state (5 seconds), if:
◆ Power On LED is steady green.
◆ Power Supply/Cooling/Temperature Fault LED is steady
amber.
◆ System Fault LED is steady amber.
◆ Invalid Address LED is steady amber.
■ 2 Gb/s drive loop is selected, if Power On LED is steady green.
Flashing
green light
One or more drives are bypassed on at least one loop.
No green
light
Indicates the 5 V aux is present, overall power fail, if Power On
LED is green and all other LEDs are off.
Invalid
Address LED
Steady
amber light
Indicates test state (5 seconds), if:
■ Power On LED is steady green.
■ Power Supply/Cooling/Temperature Fault LED is steady amber.
■ System Fault LED is steady amber.
■ 2 Gb Link Speed LED is steady amber.
Flashing
amber light
Indicates an invalid address mode ID switch setting if Power On
LED is steady green.
Table 9-2. Drive Chassis OPs Panel LED Meanings (continued)
LED Appearance Meaning