3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

8.22
Service Processor LEDs
Messages and Operator’s Guide InForm OS Version 2.3.1
8.2 Service Processor LEDs
8.2.1 Wintec Service Processor
The Wintec service processor LEDs are defined in this section. The LEDs are located at the top
of the service processor (Figure 8-14).
Figure 8-14. Wintec Service Processor LEDs
Consult Table 8-12 to verify proper functioning of the Wintec service processor displays.
Hard Disk Drive LED
0009_L_R2
NIC Port 2 LED
NIC Port 1 LED
Power LED
Reset Button
Power Button
NOTE: The Wintec Service Processor NIC Port LEDs in front and Ethernet Ports in
the rear are crisscrossed. NIC Port 2 corresponds with Eth 1 and NIC Port 1
corresponds with Eth 0.
Table 8-12. Wintec Service Processor LED Displays
LED Appearance Meaning
Hard Disk No light Indicates no activity on the hard drive.
Flashing blue light Indicates hard drive activity.
NIC Port 2 No light No network activity.
Flashing amber light Indicates network activity.