3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

7.19
Using the Component LEDs
InForm OS Version 2.3.1 Messages and Operator’s Guide
7.1.10 Supermicro II Service Processor
The Supermicro II service processor LEDs are defined in the following section. The LEDs are
located at the top of the service processor (Figure 7-11).
Figure 7-11. Supermicro II Service Processor LEDs
Consult Table 7-9 to verify proper functioning of the Supermicro II service processor displays.
Table 7-9. Supermicro II Service Processor Front-Panel Displays
LED Appearance Meaning
Power No light Indicates the service processor is off.
Steady green light Indicates the service processor is on.
Hard Disk Drive No light Indicates no hard drive activity.
Flashing amber light Indicates hard drive activity.
NIC Port 2 No light Indicates the port is not connected.
Steady green light Indicates the port is connected and there is
network activity.
Flashing green light Indicates network activity.
Hard Disk Drive LED
NIC Port 2 LED
NIC Port 1 LED
Power LED
Overheat LED
0802_L_R1
Reset Button
Power Button